home_icon
Home
>
Products
>
>
Pork Rapid Test Kit (Halal)
Pork Rapid Test Kit (Halal)
Brand: FSTEST
CatNO: IA32.4001.5
Specifications: 20tests/kit
Shelf life: 12months
Application: Intended to test porcine-derived ingredients in raw meat samples, such as meat rolls, meatballs, and raw meat materials.

Product Description

The FSTest Pork Rapid Test Kit (Halal) is based on sandwich lateral flow immunochromatography assay. The test cassette has a window for the observation of assay running and result reading. The window has an invisible T (test) zone and a C (control) zone before running the assay. When the treated sample was applied into the sample well on the device, the liquid will laterally flow through the surface of the test strip and react with the pre-coated recombinant antigens. If there is porcine-derived ingredient present in the sample, the T line will become visible. The C line should always appear after a sample is applied, which indicates a valid result .By this way, the device can indicate the presence of porcine-derived ingredient in the sample.

Features:

1.Cost-Efficient, Rapid Testing

2.High Accuracy, Clearly Color Interpreted.

3.Simple and Easy to Handle, No expertise required

4.Time-Saving: Enables sample treatment and assay completion in under 15 minutes

5.Decades of R&D Experience, Professional Brand and Reliable Quality, Good Reputation.

Application

Intended to test porcine-derived ingredients in raw meat samples, such as meat rolls, meatballs, and raw meat materials.

Limit of detection

0.1%

Kit composition

Test cassettes ×20

Extracting solution ×20

Swab x20

User manual.

Specifications

20 tests

Note: Place the reagent and sample at room temperature (15-30°C) for 15-30 minutes before using. The detection should be carriedout at room temperature (15-30℃) and keep humidity below 70% , therefore extreme humidity should be avoided.

Sample preparation

1. Absorb the tissue fluid with swab on the surface of the sample to be tested, and then immerse the swab in the extracting solution for 10 seconds. Fully stir and mix it up and down for 10-20 sec to make the sample dissolved in the solution fully

2. Remove the cotton swab and close the extraction tube lid tightly.

Procedure & Steps

1. Take the test cassette out of the bag and put it on a flat surface. Write the number of the sample to be tested on the shell of the test cassette.

2. Mount 3 drops (approximately 80-100 μL) of the above treatedsample solution into the sampling well of the test cassette, and starttiming.

3. Interpret the results after 5-10 min. Results are invalidafter15min.

 

scroll_top_icon
A-
A+
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish.