home_icon
Home
>
Products
>
>
Clenbuterol Rapid Test Kit
Clenbuterol Rapid Test Kit
Brand: FSTEST
CatNO: DR32.4712.5
Specifications: 10tests/kit
Shelf life: 12months
Application: Intended to test clenbuterol in pork, beef, mutton and other muscle tissues.

Product Description

The FSTest Clenbuterol Rapid Test Kit is based on sandwich lateral flow immunochromatography assay. The test cassette has a window for the observation of assay running and result reading. The window has an invisible T (test) zone and a C (control) zone before running the assay. When the treated sample was applied into the sample well on the device, the liquid will laterally flow through the surface of the test strip and react with the pre-coated recombinant antigens. If there is clenbuterol present in the sample, the T line will become visible. The C line should always appear after a sample is applied, which indicates a valid result .By this way, the device can indicate the presence of clenbuterol in the sample.

Application

Intended to test clenbuterol in pork, beef, mutton and other muscle tissues.

Limit of detection

0.5 μg/kg

Kit composition

Test cassettes ×10

Clenbuterol extracting solution ×1

15 mL Centrifuge tubes x 10

User manual.

Specifications

10 tests

Sample preparation

1. Make the homogenized meat sample with only tissue and avoid fats.

2. Weigh 4 g of the sample into a 15 mL centrifuge tube, mix with 0.5 mL of extracting solution and vortex or shake over for 2 min.

3. Bathe the centrifuge tube in 80℃water for 10 min. Note: Ensure the water level of the bathe surpasses the sample liquid inside of the centrifuge tube. Be aware of water leaks into the tube.

4. Centrifuge at 4000rpm for 5 min. Cool the supernatant to room temperature. The sample solution is ready for testing.

Procedure & Steps

1. Before use, ensure the cassette is between 20 to 40℃, and put

it on a flat surface.

2. Pipette 100 μL of sample solution into a microwell, mix 3-5 times with pipette, then stand for 5 min.

3. Transfer all the sample solution and mount it into the sample hole of the test cassette.

4. Interpret the results after 8-10 min. Results are invalid after 10 min.

scroll_top_icon
A-
A+
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish.