✅High Temperature Resistance: Withstands direct exposure up to 600°C without blistering or cracking
✅Superior Chemical Resistance: Excellent performance against strong acids, alkalis, and solvents—including HF, HCl, HNO₃, and Aqua Regia
✅100% Moisture-Proof: Non-porous, delamination-free under extreme humidity or spill conditions
✅Repairable Surface: Can be polished and restored for long-term use
✅Non-Flammable & Safe: Flame retardant, non-toxic, asbestos-free, and non-conductive
✅Eco-Friendly & Durable: Free from harmful emissions, long life cycle, and minimal maintenance

1. HEPA Filter with efficiency: 99.99% at 0.3uM
2. Micrprocessor control system, LED Display
3. Air speed adjustable
4. Tabletop type, easy to carry and save space.

1.  High-quality cold rolling steel electrostatic spraying exterior.
2.  Favin stainless steel or cold rolling steel inner chamber;  foursquare semicircle transition, convenient for cleaning;  space between shelves is adjustable.
3.  Optional pointer type temperature controller or intelligent type temperature controller with PID program, digital display and light touching operation key;  and with function of timing and over-temperature protection.
4.  Door with wide double-glass observation window, adjustable air-tight buckle lock, and silicon rubber seal, which provide good sealing effect and efficiently prevent heat loss

1.  Internal naturally air convection,four sides heating, to make inner temperature uniformity.
2.  Mirror stainless steel inner chamber, four corners arc transition easy to clean.
3.  PID controller, with over-temperature protection function, with over-temperature alarm, sensor fault alarm,fixed value operation, regular operation, deviation correction ,menu locking and other functions.
4.  With high quality glass window and installed LED light on the door, easy to observe the samplein side, especially under dark conditions.
5.  Portable design, the top handle is easy to move,optional 12V vehicle power supply, vehicle use is convenient.

1.The main body of the fume hood is made of 8mm A grade polypropylene material, which has good corrosion resistance and chemical resistance, integrated molding and high manufacturing precision.
2.All parts of material cutting, stamping, and drilling are burnish and Deburring, then further surface treatment such as degreasing, water washing, acid washing, water washing, neutralization, phosphating, etc. Finally, sprayed epoxy resin with a thickness of ≥ 75um after drying.
3.The fume hood adopts an upper and lower cabinet buckle structure, which is convenient for on-site assembly. The lower cabinet body adopts a movable structure, and the back is equipped with a multifunctional board facilitating the installation and maintenance of water, electricity, and gas components.

1.Structure: all steel integrated structure
2.Table top: sturdy and dense structure, able to withstand strong impacts, acid and alkali resistance, organic solvent resistance, and good load-bearing performance.
3.Cabinet: Stable structure, high strength without deformation, corrosion resistance.

1. Frame: Aluminum alloy, high strength, good corrosion resistance
2. Cabinet body: 1.0mm thick Cold rolled steel, surface treated with acid pickling, phosphating, rust prevention, and electrostatic treatment, spray coating ≥ 75um thick epoxy resin.
3. The connectors are all made of high-strength plastic.