home_icon
Home
>
Products
>
>
Staphylococcus aureus Rapid Test Kit(lateral flow)
Staphylococcus aureus Rapid Test Kit(lateral flow)
Brand: FSTest
CatNO: MC32.4114.5
Specifications: 10 tests/kit
Shelf life: 12 months
Application: Intended to test Staphylococcus aureus in water, beverages and food, etc.

Description:

FSTest Staphylococcus aureus Rapid Test Kit(lateral flow) is qualitative test based on sandwich lateral flow immunochromatographic assay. The test cassette has a window for process observation and result reading. The T (test) and a C (control) zone on the testing window are invisible before running the assay. After the treated sample is dropped into the sample hole, the liquid will flow through the surface of the test trip laterally and react with the pre-coated recombinant antigens. If there are Staphylococcus aureus present in the sample, The T-line will be visible. Meanwhile, the C line is expected to always be visible if sample is applied, which acts as an indicator of result validity. By these means, the presence of Staphylococcus aureus in the sample can be determined.

Contents:

Test cassette  x10

PBS diluent (1.5mL) x1

Enrichment Broth (50mL) x1

Disposable pipette (0.2mL) x10

User manual.

Application

Intended to test Staphylococcus aureus in water, beverages and food, etc.

LOD

100cfu/g(mL)

Storage:

Stored at 2-25℃ with seal, at a cool and dry place within a shelf-life of 12 months.

Sample preparation

1. Weigh 25mL/g of sample and put it into a sampling bottle or homogenizer cup which contains 225mL of sterilized normal saline

and make 1:10 diluted homogenate.

2. Inoculate 1mL of the sample homogenate into a test tube which contains 4mL of Enrichment Broth aseptically.

3. Incubate the test tube at 37℃ for 18-24hr (shaking at 250rpm preferred). 

4. Take 5 drops of the culture solution, add 5 drops of diluent, mix well, and the resulting solution is the test solution.

Testing

1. Take out a test cassette from the package. Please equilibrate the sample and test cassettes to room temperature (20-40℃) before opening the package.

2. Pipette 5-6 drops (around 100μL) of sample into the sample hole, wait for 15mins, then interpret results within 15-20mins. Result is invalid after 20mins.




 

scroll_top_icon
A-
A+
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish.